DJI Transmission Combo (Standard Combo）
৳
৳
SAVE ৳
- 20,000ft 1080p/60fps Transmission
- Unlimited Number of Receivers
- Seamless Auto Frequency Hopping
- End-to-End Ultra-Low Latency
- Transmits Metadata via SDI
- Dual-link SDI + HDMI simultaneous output
In Stock
Warranty :
DJI Official 1 Year Warranty
Distributor :
DJI Authorized Dealer
Brand :
Estimated Delivery :
Delivery Will be Within 7 Days
Specifications
Specifications
Weight
DJI Video Transmitter: Approx. 350 g (excluding antennas)
DJI High-Bright Remote Monitor: Approx. 727 g (excluding antennas)
DJI Video Receiver: Approx. 350 g (excluding antennas)"
Dimensions
DJI Video Transmitter: 127×87×26 mm (L×W×H, excluding antennas)
DJI High-Bright Remote Monitor: 213×135×51 mm (L×W×H, excluding antennas)
DJI Video Receiver: 127×87×26 mm (L×W×H, excluding antennas)
Operating Frequency
When using the DJI Video Transmitter with the DJI High-Bright Remote Monitor:
Non-DFS Frequency Band:
2.400-2.484 GHz
5.150-5.250 GHz
5.725-5.850 GHz
DFS Frequency Band:
5.250-5.350 GHz
5.470-5.600 GHz
5.650-5.725 GHz
When using the DJI Video Transmitter with the DJI Video Receiver:
Non-DFS Frequency Band:
2.4000-2.4835 GHz
5.150-5.250 GHz
5.725-5.850 GHz
DFS Frequency Band:
5.250-5.350 GHz
5.470-5.725 GHz
5.725-5.850 GHz
In some countries and regions, the 5.1/5.2/5.8 GHz frequencies are prohibited, or the 5.1/5.2 GHz frequencies are only allowed for indoor use. Check local laws and regulations for more information. 5.6000-5.650 GHz is not used.
Transmitter Power (EIRP)
When using the DJI Video Transmitter with the DJI High-Bright Remote Monitor:
2.400-2.484 GHz:
<33 dBm (FCC)
<20 dBm (SRRC/CE/MIC)
5.150-5.250 GHz:
<23 dBm (FCC/SRRC/MIC)
5.250-5.350 GHz:
<30 dBm (FCC)
<23 dBm (SRRC/MIC)
5.470-5.600 GHz，5.650-5.725 GHz:
<30 dBm (FCC)
<23 dBm (CE/MIC)
5.725-5.850 GHz:
<33 dBm (FCC/SRRC)
<14 dBm (CE)
When using the DJI Video Transmitter with the DJI Video Receiver:
2.4000-2.4835 GHz:
<33 dBm (FCC)
<20 dBm (SRRC/CE/MIC)
5.725-5.850 GHz:
<33 dBm (FCC)
<14 dBm (CE)
<23 dBm (SRRC)
Max Bandwidth
40 MHz
Max Bitrate
40 Mbps
Power Consumption
DJI Video Transmitter: 11 W
DJI Video Receiver: 9 W
Power Supply Voltage
6 to 18 V
Output Voltage
Power output port: 6 to 18 V
Operating Time
DJI Video Transmitter: 3 hours 40 minutes
Measured at room temperature (25°C/77°F) with a fully charged WB37 Intelligent Battery.
DJI High-Bright Remote Monitor: 2 hours
Measured at room temperature (25°C/77°F) with a fully charged WB37 Intelligent Battery.
DJI Video Receiver: 3 hours 50 minutes
Tested at room temperature (25°C/77°F) when powered by a fully charged WB37 Intelligent Battery and used with the DJI Video Transmitter.
Input Video Format
"DJI Video Transmitter:
1080p: 23.98/24/25/29.97/30/50/59.94/60fps
720p: 50/59.95/60fps
Output Video Format
When using the DJI Video Transmitter with the DJI High-Bright Remote Monitor:
1080p: 23.98/24/25/29.97/30/50/59.94/60fps
720p: 50/59.95/60fps
When using the DJI Video Transmitter with the DJI Video Receiver:
1080p: 23.98/24/25/29.97/30/50/59.94/60fps
720p: 50/59.94/60fps
When using the Ronin 4D Video Transmitter with the DJI Video Receiver:
1080p: 24/25/30/50/60fps
Input Audio Format
SDI embedded, HDMI embedded
Output Audio Format
PCM
Video Transmission System
O3 Pro
Video Transmission Latency
70 ms
Measured when shooting 1080p/60fps video.
Video Coding Format
H.264
Max Transmission Distance
6 km (FCC)
4 km (CE/SRRC/MIC)
Measured in open environments without obstructions or interference.
Operating Temperature
-10° to 45° C (14° to 113° F)
When using the WB37 Intelligent Battery, the recommended operating temperature is above 0° C (32° F). Take measures to keep the battery warm when using in temperatures below 0° C (32° F).
Mirror Control Mode Supported Camera Models
ZV1/A7 III/A7S III/A7M III/A7R III/A7R IV/A7 IV/FX3/A7S II/A6600/A6400 and all Sony cameras that support BRAVIA (HDMI control)
The High-Bright Monitor Combo includes a DJI Video Transmitter and a DJI High-Bright Remote Monitor. The DJI High-Bright Remote Monitor integrates receiver, monitor, recording, and control all into one, and delivers a more efficient coordinated shooting experience without the need for extensive accessories. It is equipped with a 7-inch wide-gamut touchscreen with a brightness of up to 1,500 nits, and supports independent recording and playback of 1080p/60fps H.264. It comes with supportive tools like safe zone, frame guide, zebra stripes, false color, peaking, waveform, and tapping twice to zoom, as well as screen color calibration and custom 3D LUT for precise composition, exposure, and focusing. Additionally, the remote monitor has a built-in gyroscopic sensor that enables it to act as a standalone motion controller for Ronin 2 or RS 3 Pro without the need for additional accessories. This allows users to achieve more complex camera movements from a moving vehicle or with a jib.
The Standard Combo includes a DJI Video Transmitter and a DJI Video Receiver. It inherits extended-range, low-latency transmission of DJI Transmission, and newly supports metadata transmission. When used with ARRI, RED, or other mainstream cinema cameras, it can transmit file name, timecode, recording trigger, camera settings (shutter, ISO, etc.,), lens information (aperture, focal length) from the receiver to monitors and QTAKE, allowing directors, cinematographers, and DIT teams to receive detailed shooting information on set.
The Standard Combo includes a DJI Video Transmitter and a DJI Video Receiver. It inherits extended-range, low-latency transmission of DJI Transmission, and newly supports metadata transmission. When used with ARRI, RED, or other mainstream cinema cameras, it can transmit file name, timecode, recording trigger, camera settings (shutter, ISO, etc.,), lens information (aperture, focal length) from the receiver to monitors and QTAKE, allowing directors, cinematographers, and DIT teams to receive detailed shooting information on set.
Devices that support outputting SDI and HDMI signals.
It supports transmission at up to 1080p/60fps.
It only supports HDMI output, and does not support HDMI input. You can input HDMI signals via the HDMI port on the right side of the DJI High-Bright Remote Monitor.
It only supports HDMI output, and does not support HDMI input. You can input HDMI signals via the HDMI port on the right side of the DJI High-Bright Remote Monitor.
Yes. You can use third-party V-mount battery adapter plates to use V-mount batteries as a power supply.
Currently, the DJI High-Bright Remote Monitor only works with the DJI Ronin 4D Video Transmitter or DJI Video Transmitter, and does not support video transmitters of other brands.
It is recommended to use DJI standard antennas; otherwise, signal strength may be weaker.
There are two transmission modes: Control mode and Broadcast mode.
In Control mode, two DJI High-Bright Remote Monitors can be connected at the same time. In Broadcast mode, an unlimited number of receivers can be connected.
In Control mode, two DJI High-Bright Remote Monitors can be connected at the same time. In Broadcast mode, an unlimited number of receivers can be connected.
Total Amount
৳